New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002     

Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.     

Characteristic lengths and the structure of salt free polyelectrolyte solutions. A small angle neutron scattering study

We have studied salt free semi dilute polyelectrolyte solutions by small angle neutron scattering. Specific labelling associated with an extrapolation method has allowed the separation of the form factor of a single polyelectrolyte chainS ₁(q) and the structure factorS ₂(q). Two lengths are deduced from these two factors: the persistence lengthb _t which characterizes the electrostatic interactions along the chain by a fitting ofS ₁(q) with calculation of the scattering function for a wormlike chain, and fromS ₂(q),q _m ^–1 which characterizes the interactions between chains. These two lengths vary in the same way with the concentration of polyions (b _t C _p ^–1/2 ,q _m ^–1 C _p ^–1/2 ) and a constant relation exists between them: only one length is then necessary to describe the structure of polyelectrolyte soltuion on this semidilute concentration range.Laboratoire Commun CEA-CNRS.     

测量圆盘转动惯量产生误差的曲线研究

结合三线摆实验的基本过程,进行实验数据的采集。利用投影法来测量圆盘的转角大小,借助于matlab的cftool工具箱,对数据进行曲线拟合,对测出来的二组数据拟合,得到转角与百分差曲线图。通过误差的大小比较,得出圆盘转动惯量测量值与理论值的百分差随转角变化最接近于三次曲线。     

Significant change in water contact angle of electrospray‐synthesized SiO2 films depending on their surface morphology

Amorphous SiO₂ films were deposited by means of an electrospray technique. The relation between the water contact angle (WCA) of the deposited SiO₂ films and the surface morphology is investigated. The feeding rate of the electrospray process greatly affects the morphology of the synthesized SiO₂ films. There is also a significant change in the WCA on the surface of the films: the rougher the surface, the greater the WCA. A model based on the Cassie–Baxter formulation is used to explain the change observed in the WCA on the SiO₂ films. Copyright © 2012 John Wiley & Sons, Ltd.     

Meissner Anisotropy in Deuterated (TMTSF)2Clo4

Both the Meissner-signal (flux expulsion on cooling through T_c) and the shielding signal (obtained by turning on a field in the superconducting state) have been observed in deuterated single crystals for fields oriented both along and normal to the chain axis. A possible isotope effect on T_c is discussed. We find complete diamagnetism in normal fields and incomplete (～ 40 %) diamagnetism in parallel fields. A dramatic drop of the Meissner-effect in parallel fields well below H_c1 is observed and not yet well explained.     

FULLY SYMBOLIC GENERATION OF COMPLEX MULTIBODY MODELS*

Abstract

In this paper, a quasistatic finite element model of a spur gear pair is developed. A node-to-target contact formulation is given, where calculations of initial gaps are based upon the actual geometry of the gear flanks rather than upon a contact node and a facet or a line segment. By using a special contact search algorithm, profile modifications and mounting errors are easily incorporated in the analysis. The problem, which also includes friction, is solved by using a nonsmooth Newton method. The static transmission error can be calculated with accuracy with a relatively small number of nodes along the gear flanks. Several examples are given in order to demonstrate the model.     

Numerical methods for light propagation in large LC cells: a new approach

Accurate numerical methods for the propagation of light in large 3D samples with strong lateral variation of the director field require prohibitive amounts of time. We consider and compare a standard spectral method and the Finite Difference in Frequency Domain method, showing that the CPU time can be reduced by one or two orders of magnitude using a perturbation approach or a recently developed Reduced Order Method. The equations obtained are applied to liquid crystal cells with in-plane switching, illuminated by a large incoherent source. The developed formalism, based on numerically exact equations, is particularly suitable for treating magnetic or optically active media and for extending to such media the well known approximations based on the 4 × 4 (Berreman) or 2 × 2 (Jones) matrices.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.